Fixing My iPhone Screen | The Ultimate DIY Guide

The ultimate DIY Guide to fixing your iPhone Screen!
iPhone Screen Repair

Table of Contents

The ultimate guide to Fixing your iPhone Screen! We cover the tools you need, and the steps to take to fix your iPhone Screen. Fixing and replacing an iPhone screen can seem daunting, but with the right tools, instructions, and patience, it’s a task that can be accomplished at home. This blog post will guide you through the entire process, from gathering the necessary tools to completing the replacement, and ensuring your iPhone looks as good as new.

Understanding the Task Ahead for Fixing Your iPhone Screen

Firstly, it’s important to assess the damage to your iPhone screen to determine if a full replacement is necessary or if a simpler repair might suffice. If the screen is cracked but the display and touch functionality are still intact, a glass replacement might be all that’s needed. However, if the display is malfunctioning or unresponsive, you’ll likely need to replace the entire screen assembly.

Tools and Materials Needed for an iPhone Screen Repair

To replace an iPhone Screen, you will need the following tools and materials:

  • Replacement iPhone screen (make sure it’s compatible with your iPhone model)
  • Pentalobe screwdriver (to open the iPhone)
  • Phillips #000 screwdriver (for internal screws)
  • Spudger or plastic opening tool
  • Suction cup (to lift the screen)
  • Tweezers
  • Magnetic project mat (optional, but helpful for keeping screws organized)

Visit the iFixit Store for all your DIY Repair Needs

Step-by-Step Guide to Fixing Your iPhone Screen

Fixing my iPhone Screen

Step 1: Power Off Your iPhone

Ensure your iPhone is completely powered off to avoid any short circuits or damage during the repair process.

Step 2: Remove the Pentalobe Screws

Locate the two pentalobe screws on either side of the charging port. Use your pentalobe screwdriver to carefully remove these screws and set them aside in a safe place.

Step 3: Open the iPhone

Attach the suction cup near the Home button (or on the bottom edge for iPhone X and newer models without a Home button). Gently pull on the suction cup to create a small gap between the screen and the phone’s frame. Use a spudger or plastic opening tool to gently widen this gap and lift the screen. Be careful not to pull too hard to avoid damaging the internal cables connecting the screen to the phone’s motherboard.

Step 4: Disconnect the Battery and Screen

Before proceeding, locate and disconnect the battery to prevent any electrical damage. Then, use your screwdriver to remove the screws securing the metal plate over the screen connectors. Carefully disconnect the connectors using a spudger or plastic tool.

Step 5: Remove the Damaged Screen

Once the connectors are disconnected, you can remove the damaged screen. If your replacement screen doesn’t come with certain components (like the earpiece speaker, front camera, or Home button), you’ll need to transfer these from your old screen to the new one. This process involves removing additional screws and carefully transferring the components, ensuring they’re securely reattached to the new screen.

Step 6: Attach the New Screen

Start by connecting the screen cables to the motherboard. Once secured, reattach the metal plate and screw it in place. Before sealing the phone, reconnect the battery and power on your iPhone to test the new screen, ensuring the display and touch functionality work correctly.

Step 7: Seal the iPhone

If everything is working as expected, power off your iPhone again. Carefully align the top edge of the screen with the frame, then gently press down around the edges to seal the phone. Be sure not to force the screen into place to avoid damaging it. Finally, reinsert the pentalobe screws on either side of the charging port.

An in-depth video guide from our friends at iFixit

Let the pros at Computer Cave Help!

DIYing your iPhone Screen Repair can be immensely complex. At Computer Cave, we can fix your iPhone Screen in less than a couple of hours, with your iPhone back in hand like new. Get a quote from us today!

Final Thoughts

Replacing an iPhone screen requires patience and attention to detail. It’s crucial to work slowly and carefully to avoid damaging internal components. If at any point you feel uncomfortable or unsure, consider seeking professional repair services. However, successfully completing the repair can be incredibly rewarding and cost-effective compared to professional repair costs.

Remember, the process might vary slightly depending on your iPhone model, so refer to specific guides or videos for your model if necessary. With the right preparation and care, you can give your iPhone a new lease on life with a fresh, clear screen.

Disclaimer: This guide is provided for informational purposes only. While we strive to provide clear and accurate instructions, repair processes can vary based on the specific model and conditions of the device. “Computer Cave” is not responsible for any damage, issues, or loss that may occur as a result of following this guide. Undertaking repairs on your electronic devices carries the risk of personal injury or property damage, and may void your device’s warranty. If you are not comfortable with the repair process or if your device is under warranty, we recommend seeking professional repair services. By proceeding with any repairs, you acknowledge and assume all risks associated with these activities.

Most Recent Posts

The ultimate guide to Fixing Your iPad Screen! We cover the tools you need, and the steps required in this guide.
The ultimate DIY Guide to fixing your iPhone Screen!

Stay Up to Date on What’s New

Enjoy these insights and resources?  Consider signing up!  We’re always adding new resources to benefit our customers.

Track My Repair

Get an extra

$10 Off

your first repair.

Sign up with your email!  We will never send you spam, just your coupon.  Don’t see it in your inbox?  Make sure to opt-in, and check spam.